Brother Sewing Machine Bobbin Winder Not Spinning. Thread caught between spindle shaft shoulder and bearing. Slide the bobbin winder shaft to the.
Turn the bobbin clockwise, by hand, until the spring on the shaft slides into the notch in the bobbin. The bobbin winder also might not be fully engaged. The tension disks do not match each other (they can be slightly out of alignment).
Place the bobbin on the bobbin winder shaft so that the spring on the shaft fits into the notch in the bobbin. Put the bobbin onto the bobbin winder shaft and slide the bobbin winder shaft to the right. Swing up the bobbin thread spool pin.
Popular brother designs brother sewing machine bobbin not spinning. The singer 15 manual notes that your bobbin winder may not work if the pressure of the bobbin tire against the balance wheel is insufficient. #1) you’ve got some old oil on the shaft inside that needs to be removed.
The thread is not passed through the bobbin winding thread guide correctly. Brother sewing machine bobbin winder not spinning. (2) bobbin winder shaft spring.
Slide the bobbin winder shaft to the. Check for scratches on the bobbin as it may cause the bobbin to. An easy and quick solution to this problem is first to check that the bobbin thread hasn’t run out and, if so, wind some more.
Take out the bottom plate of the machine. Press down on the bobbin until it snaps into place. This winder will load thread from a larger spool onto a small round spool.
Comments
Post a Comment